В данном разделе представлены основные стандарты в области ЭМС. За получением информации по этим и другим нормативным документам обращайтесь по e-mail: emc@eprom.ru или телефонам указанным в разделе "Контакты".  



Military Standards



  • MIL-A-17161D: Absorber, Radio Frequency Radiation (Microwave Absorbing Material), General Specification

  • MIL-T-81490A: Transmission Lines, Transverse Electromagnetic Mode

  • MIL-STD-188-125-2: High-Altitude Electromagnetic Pulse (HEMP) Protection for Ground-Based C4I Facilities Performing Critical, Time-Urgent Missions - Part 2. Transportable Systems

  • MIL-STD-220B: Method of Insertion Loss Measurement

  • MIL-STD-449D: Measurement of Radio Frequency Spectrum Characteristics

  • MIL-STD-461E: Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment. Versions 461/2C and 462D are also available

  • MIL-STD-464: Electromagnetic Environmental Effects Requirements for Systems

  • MIL-STD_469B: Radar Engineering Interface Requirements, Electromagnetic Compatibility Metric

  • MIL-STD-981B: Design, Manufacturing and Quality Standards for Custom Electromagnetic Devices for Space Applications

  • MIL-STD-1310G: Shipboard Bonding, Grounding, and Other Techniques for Electromagnetic Compatibility and Safety

  • MIL-STD-1377: Effectiveness of Cable, Connector, and Weapon Enclosure Shielding and Filters in Precluding Hazards of Electromagnetic Radiation to Ordnance, Measurement

  • MIL-STD-1541A: Electromagnetic Compatibility Requirements for Space Systems

  • MIL-STD-1542B: Electromagnetic Compatibility and Grounding Requirements for Space System Facilities

  • MIL-STD-1605: Procedures for Conducting a Shipboard Electromagnetic Interference (EMI) Survey (Surface Ships)

  • MIL-STD-1686C: Electrostatic Discharge Control Program for the Protection of Electrical and Electronic Parts, Assemblies and Equipment (Excluding Electrically Initiated Explosive Devices)



Handbooks



  • MIL-HDBK-235-1B Not 1: Electromagnetic (Radiated) Environment Considerations for Design and Procurement of Electrical and Electronic Equipment, Subsystems, and Systems

  • MIL-HDBK-237C: Electromagnetic Environmental Effects and Spectrum Certification Guidance for the Acquisition Process

  • MIL-HDBK-274: Electrical Grounding for Aircraft Safety

  • MIL-HDBK-1512: Electroexplosive Subsystems, Electrically Initiated, Design Requirements and Test Methods

  • MIL-HDBK-1857: Grounding, Bonding and Shielding Design Practices


 ANSI EMC Standards



  • C63.022-1996: American National Standard for Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment

  • C63.12-1999: American National Standard for Electromagnetic Compatibility Limits - Recommended Practice

  • C63.13-1991: American National Standard Guide on the Application and Evaluation of EMI Power-Line Filters for Commercial Use

  • C63.14-1992: American National Standard Dictionary for Technologies of Electromagnetic Compatibility (EMC), Electromagnetic Pulse (EMP), and Electrostatic Discharge (ESD) (Dictionary of EMC/EMP/ESD Terms and Definitions)

  • C63.16-1993: American National Standard Guide for Electrostatic Discharge Test Methodologies and Criteria for Electronic Equipment

  • C63.17-1998: American National Standard for Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices

  • C63.18-1997: American National Standard Recommended Practice for an On-Site, Ad Hoc Test Method for Estimating Radiated Electromagnetic Immunity of Medical Devices to Specific Radio-Frequency Transmitters

  • C63.2-1996: American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications

  • C63.4-1992: American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz

  • C63.5-1998: American National Standard for Calibration of Antennas Used for Radiated Emission Measurements in Electromagnetic Interference (EMI) Control. Calibration of Antennas (9kHz to40 GHz)

  • C63.6-1996: American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements

  • C63.7-1992: American National Standard Guide for Construction of Open-Area Test Sites for Performing Radiated Emission Measurements

  • C95.2-1982: American National Standard Radio Frequency Radiation Hazard Warning Symbol

  • S1.14-1998: Recommendations for Specifying and Testing the Susceptibility of Acoustical Instruments to Radiated Radio-Frequency Electromagnetic Fields, 25 MHz.(Acoustical Society of America)

  • T1.320-1994 (R1999): Above-Baseline Electrical Protection for Designated Telecommunications Central Offices and Similar-Type Facilities Against High-Altitude Electromagnetic Pulse (HEMP) (Alliance for Telecommunications Industry)


 U.S. Avionics EMC Standards



  • RTCA DO-160D: Environmental Conditions and Test Procedures for Airborne Equipment

  • FAA Advisory Circular 20-136: Protection of Aircraft Electrical/Electronic Systems Against the Indirect Effects of Lightning (3/5/90)

  • Boeing D200Z001

  • Boeing D6-16050-4

  • Boeing WZZ7000

  • MIL-STD-461C/D/E

  • MIL-STD-462C/D

  • AE4L-81: Lightning Manual. (SAE)

  • AE4L-81-2: Test Waveforms and Techniques for Assessing the Effects of Lightning Induced Transients. (SAE)

  • ARP 935A: Control Plan/Technical Construction File. (SAE)

  • ARP 936A: Capacitor, 10 mF for EMI Measurements. (SAE)

  • ARP 958C: Electromagnetic Interference Measurement Antennas, Standard Calibration Method. (SAE)

  • ARP958D: Electromagnetic Interference Measurement Antennas, Standard Calibration Method. (SAE)

  • ARP1172: Filters, Conventional, EMI Reduction, Specifications for. (SAE)

  • ARP1173: Test Methods for EMI Gasketing. (SAE)

  • ARP1267: EMI Measurement of Impulse Generators, Standard Calibration Requirements and Techniques. (SAE)

  • ARP1481A: Corrosion Control and Electrical Conductivity in Enclosure Design. (SAE)

  • ARP1705: Coaxial Test Procedure to Measure the RF Shielding Characteristics of EMC Gasket Materials. (SAE)

  • ARP1870: Aerospace Systems Electrical Bonding and Grounding for Electromagnetic Compatibility and Safety. (SAE)

  • ARP1972: Recommended Practices and Procedures for EMC Testing. (SAE)

  • ARP4043A: Flightline Bonding and Grounding of Aircraft. (SAE)

  • ARP4242: Electromagnetic Compatibility Control Requirements, Systems. (SAE)

  • ARP4244: Recommended Insertion Loss Test Methods for EMI Power Line Filters Aerospace Information Reports (AIRs). (SAE)

  • ARP5412: Aircraft Lightning Environment and Related Test Waveforms. (SAE)

  • ARP5413: Certification of Aircraft Electrical/Electronic Systems for the Indirect Effects of Lightning. (SAE)

  • ARP5415: User's Manual forCertification of Aircraft Electrical/Electronic Systems Against the Indirect Effects of Lightning. (SAE)

  • AIR1147: EMI on Aircraft from Jet Engine Charging. (SAE)

  • AIR1209: Construction and Calibration of Parallel-Plate Transmission Lines for EMI Susceptibility Testing. (SAE)

  • AIR1221: EMC System Design Checklist. (SAE)

  • AIR1255: Spectrum Analyzers for EMI Measurements. (SAE)

  • AIR1394A: Cabling Guidelines for Electromagnetic Compatibility. (SAE)

  • AIR1404: DC Resistivity vs. RF Impedance of EMI Gaskets. (SAE)

  • AIR1423: EMC on Gas Turbine Engines for Aircraft Propulsion. (SAE)

  • AIR1425A: Methods of Achieving EMC of Gas Turbine Engine Accessories, for Self-Propelled Vehicles. (SAE)

  • AIR1499: Recommendations for Commercial EMC Susceptibility Requirements. (SAE)

  • AIR1662: Minimization of Electrostatic Hazards in Aircraft Fuel Systems. (SAE)

  • AIR1700A: Upper Frequency Measurement Boundary for Evaluation of Shielding Effectiveness in Cylindrical Systems. (SAE)

  • AIR4079: Procedure for Digitized Method of Spark Energy Measurement. (SAE)

  • ISO 2315:1980: Aircraft - Two- and four-pole sealed electromagnetic relays, 2 A and 3 A - Clearance and Fixing Dimensions

  • ISO 5867-1:1996: Aircraft - Electromagnetic relays and contactors - Part 1: General Requirements


 Vehicle EMC Standards



  • GM9112P: Immunity to Radiated Electromagnetic Fields (BCI Method) EMC - Component Test Procedure

  • GM9120P: Immunity to Radiated Electromagnetic Fields - (Reverberation Method) EMC - Component Test Procedure

  • J1113/1_199507: Electromagnetic Compatibility Measurement Procedures and Limits for Vehicle Components (except aircraft) 60 Hz to 18 GHz. (SAE)

  • J1113/2_199609: Electromagnetic Compatibility Measurement Procedure for Vehicle Components (except aircraft) Conducted Immunity, 30 Hz to 250 kHz. All Leads. (SAE)

  • J1113/3_199511: Conducted Immunity, 250 kHz to 500 MHz, Direct Injection of Radio Frequency (RF) Power. (SAE)

  • J1113/4_199802: Immunity to Radiated Electromagnetic Fields. Bulk Current Injection (BCI) Method. (SAE)

  • J1113/11_200003: Immunity to Conducted Transients on Power Leads. (SAE)

  • J1113/12_200010: Electrical Interference by Conduction and Coupling - Coupling Clamp and Chattering Relay. (SAE)

  • J1113/13_199710: Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 13. Immunity to Electrostatic Discharge. (SAE)

  • J1113/21_199801: Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 21. Immunity to Electromagnetic Fields, 10 kHz to 18 GHz. Absorber-Lined Chamber (SAE)

  • J1113/22_199610: Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 22.Immunity to Radiated Magnetic Fields from Power Lines. (SAE)

  • J1113/23_199509: Electromagnetic Compatibility Measurement Procedure for Vehicle Components. Immunity to Radiated Electromagnetic Fields, 10 kHz to 200 MHz. Strip Line Method. (SAE)

  • J1113/24_200005: Immunity to Radiated Electromagnetic Fields, 10kHz to 200 MHz, Crawford TEM Cell and 10 kHz to 5 GHz, Wideband TEM Cell. (SAE)

  • J1113/25_199902: Electromagnetic Compatibility Measurement Procedure for Vehicle Components. Immunity to Radiated Electromagnetic Fields, 10 kHz to 1000 MHz, Tri-Plate Line Method. (SAE)

  • J1113/26_200107: Electromagnetic Compatibility Measurement Procedure for Vehicle Components. Immunity to AC Power Line Electric Fields. (SAE)

  • J1113/27_199502: Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 27. Immunity to Radiated Electromagnetic Fields, Reverberation Method. (SAE)

  • J1113/41_200005: Limits and Methods of Radio Disturbance Characteristics of Components and Modules for the Protection of Receivers Used On-Board Vehicles. (SAE)

  • J1113/42_200004: Electromagnetic Compatibility - Component Test Procedure - Part 42, Conducted Transient Emissions. (SAE)

  • J1497_199404: Design Guide for Formed-in-Place Gaskets. (SAE)

  • J1752/1_199703: Electromagnetic Compatibility Measurement Procedures for Integrated Circuits. Integrated Circuit EMC Measurement Procedures, General and Definition. (SAE)

  • J1752/2_199503: Electromagnetic Compatibility Measurement Procedures for Integrated Circuits. Integrated Circuit Radiated Emissions Diagnostic Procedure, 150 kHz to 1000 MHz, Magnetic Field. Loop Probe. (SAE)

  • J1752/3_199503: Electromagnetic Compatibility Measurement Procedures for Integrated Circuits. Integrated Circuit Radiated Emissions Measurement Procedure, 150 kHz to 1000 MHz. TEM Cell. (SAE)

  • J551/1_199606: Performance Levels and Methods of Measurement of Electromagnetic Compatibility of Vehicles and Devices, 60 Hz to 18 GHz. (SAE)

  • J551/2_199403: Test Limits and Methods of Measurement of Radio Disturbance Characteristics of Vehicles, Motorboats, and Spark-Ignited Engine-Driven Devices. (SAE)

  • J551/4_200005: Test Limits and Methods of Measurement of Radio Disturbance Characteristics of Vehicles and Devices, Broadband and Narrowband, 150 kHz to 1000 MHz. (SAE)

  • J551/5_199712: Performance Levels and Methods of Measurement of Magnetic and Electric Field Strength from Electric Vehicles, Broadband, 9 kHz to 30 MHz. (SAE)

  • J551/11_200009: Vehicle Electromagnetic Immunity - Off-Vehicle Source. (SAE)

  • J551/12_199609: Vehicle Electromagnetic Immunity - On-Board Transmitter Simulation. (SAE)

  • J551/13_199403: Vehicle Electromagnetic Immunity - Bulk Current Injection. (SAE)

  • J551/15_199505: Vehicle Electromagnetic Immunity - Electrostatic Discharge (ESD). (SAE)

  • J551/17_199710: Vehicle Electromagnetic Immunity - Power Line Magnetic Fields. (SAE)

  • J1812_199610: Function Performance Staus Classification for EMC Immunity Testing. (SAE)

  • ISO 11451-1:2001: Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General and definitions

  • ISO 11451-2:2001: Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Off-vehicle radiation sources

  • ISO 11451-3:1994: Road vehicles - Electrical disturbances by narrowband radiated electromagnetic energy - Vehicle test methods - Part 3: On-board transmitter simulation

  • ISO 11451-4:1995: Road vehicles - Electrical disturbances by narrowband radiated electromagnetic energy - Vehicle test methods - Part 4: Bulk current injection (BCI)

  • ISO 11452-1:2001: Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General and definitions

  • ISO 11452-2:1995: Road vehicles - Electrical disturbances by narrowband radiated electromagnetic energy - Component test methods - Part 2: Absorber-lined chamber

  • ISO 11452-3:2001: Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: Transverse electromagnetic mode (TEM) cell

  • ISO 11452-4:2001: Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Bulk current injection (BCI)

  • ISO 11452-5:1995: Road vehicles - Electrical disturbances by narrowband radiated electromagnetic energy - Component test methods - Part 5: Stripline

  • ISO 11452/6: Road Vehicles - Electrical Disturbances by Narrowband Radiated Electromagnetic Energy - Component Test Methods - Part 6: Parallel Plate Antenna (ISO)

  • ISO 11452-7:1995: Road vehicles - Electrical disturbances by narrowband radiated electromagnetic energy - Component test methods - Part 7: Direct radio frequency (RF) power injection


 U.S. Medical EMC Standards 



  • AAMI TIR18: 1997: Guidance on Electromagnetic Compatibility of Medical Devices for Clinical/Biomedical Engineers-Part 1: Radiated Radio-Frequency Electromagnetic Energy, 1ed.

  • ANSI/AAMI PC69:2000: Active Implantable Medical Devices - Electromagnetic Compatibility - EMC Test Protocols for Implantable Cardiac Pacemakers and Implantable Cardioverter Defibrillators, 1ed.

  • ANSI/AAMI/IEC 60601-1-2:2001: Medical electrical equipment, Part 1-2: General requirements for safety-Collateral standard: Electromagnetic compatibility-Requirements and tests

  • ISO/FDIS 7176-21: Wheelchairs -- Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters

  • FDA 510(k) Premarket Notification


контакты e-mail: emc@eprom.ru сообщение с сайта форум